ABB ACS880 Series, Инструкция к добавке

Страница: 9 / 50

Introduction 5
Terms and abbreviations
This manual uses the following terms and abbreviations:
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Term/
Abbreviation Expansion Definition
AI Analog input Interface for analog input signals
AO Analog output Interface for analog output signals
B Boolean Data type boolean
DDCS Distributed Drive
Communication System A protocol used in optical fiber communication.
Def Default value Default value
DI Digital input Interface for digital input signals
DO Digital output Interface for digital output signals
FbEq Fieldbus equivalent Value on control panel converted to an integer
value when communicated over a serial
communication link (fieldbus interface)
I Integer Data type integer
I/O Input/Output Input/Output
Parameter - User-adjustable operation instruction to the
drive, or signal
measured or calculated by the drive
R Real Data type real
RO Relay output Interface for a digital output signal implemented
with a relay.
FDCO-01/02 - Optional DDCS communication module
Type - Data type