ABB ACS880 ESP, Руководство по прошивке

Страница: 359 / 494

Parameters 359
Current
measurement
calibration Current measurement calibration . 5
Advanced Advanced ID run. 6
Advanced Standstill Advanced Standstill ID run. 7
99.15 Motor polepairs
calculated Calculated number of pole pairs in the motor. 0
0…1000 Number of pole pairs. 1 = 1
99.16 Motor phase order Switches the rotation direction of motor. This parameter
can be used if the motor turns in the wrong direction (for
example, because of the wrong phase order in the motor
cable), and correcting the cabling is considered
impractical.
Note:
• Changing this parameter does not affect speed
reference polarities, so positive speed reference will
rotate the motor forward. The phase order selection just
ensures that “forward” is in fact the correct direction.
• After changing this parameter, the sign of encoder
feedback (if any) must be checked. This can be done by
setting parameter
90.41 Motor feedback selection to
Estimate , and comparing the sign of 90.01 Motor speed
for control to 90.10 Encoder 1 speed (or 90.20 Encoder
2 speed ). If the sign of the measurement is incorrect,
the encoder wiring must be corrected or the sign of
90.43 Motor gear numerator reversed.
U V W
U V W Normal. 0
U W V Reversed rotation direction. 1
200
200 Safety
FSO-xx settings.
This group contains parameters related to the optional FSO-xx safety functions module. For details on the
parameters in this group, refer to the documentation of the FSO-xx module.
No. Name/Value Description Def/
FbEq16