ABB ACS880 ESP, Руководство по прошивке

Страница: 329 / 494

Parameters 329
91.21 Module 1 temp
sensor type Specifies the type of temperature sensor connected to
interface module 1. None
None None. 0
PTC PTC. (The unit is ohms.) 1
KTY-84 KTY84. (The unit is selected by parameter 96.16 Unit
selection .)
2
91.22 Module 1 temp filter
time Defines a filtering time for the temperature measurement
through interface module 1. 1500 ms
0…10000 ms Filtering time for temperature measurement. -
91.24 Module 2 temp
sensor type Specifies the type of temperature sensor connected to
interface module 2. None
None None. 0
PTC PTC. (The unit is ohms.) 1
KTY-84 KTY84. (The unit is selected by parameter 96.16 Unit
selection .)
2
91.25 Module 2 temp filter
time Defines a filtering time for the temperature measurement
through interface 2. 1500 ms
0…10000 ms Filtering time for temperature measurement. -
91.31 Module 1 TTL output
source Selects the encoder input on interface module 1 whose
signal is echoed by or emulated to the TTL output.
See also section
Encoder support (page 63 ).
Not selected
Not selected TTL output not in use. 0
Module input 1 Input 1 is echoed by or emulated to the TTL output. 1
Module input 2 Input 2 is echoed by or emulated to the TTL output. 2
91.32 Module 1 emulation
pulses/rev Defines the number of TTL pulses per revolution for
encoder emulation output of interface module 1. 0
0…65535 Number of TTL pulses for emulation. 1 = 1
91.33 Module 1 emulated Z-
pulse offset With interface module 1, defines when zero pulses are
emulated in relation to zero position received from the
encoder.
For example, with a value of 0.50000, a zero pulse is
emulated whenever the encoder position passes 0.5
revolutions. With a value of 0.00000, a zero pulse is
emulated whenever the encoder position passes zero
position. 0.00000
0.00000 … 1.00000
rev Position of emulated zero pulses. 32767 = 1 rev
91.41 Module 2 TTL output
source Selects the encoder input on interface module 2 whose
signal is echoed by or emulated to the TTL output.
See also section
Encoder support (page 63 ).
Not selected
Not selected TTL output not in use. 0
Module input 1 Input 1 is echoed by or emulated to the TTL output. 1
Module input 2 Input 2 is echoed by or emulated to the TTL output. 2
91.42 Module 2 emulation
pulses/rev Defines the number of TTL pulses per revolution for
encoder emulation output of interface module 2. 0
0…65535 Number of TTL pulses for emulation. 1 = 1
No. Name/Value Description Def/
FbEq16