ABB ACS880-34, Руководство по оборудованию

Страница: 60 / 256

60 Guidelines for planning the electrical installation
The abbreviations used in the table are defined below.
Random
-wound
HX_ and
AM_ ** 0 V < U
N
< 500 V Enamelled
wire with fiber
glass taping + N + CMF
500 V < U
N
< 690 V + N + d u /d t + CMF
HDP Consult the motor manufacturer.
* manufactured before 1.1.1998
** For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
Non-ABB motors
Random
-wound
and
form-
wound U
N
< 420 V Standard:
Û
LL
= 1300 V
+ N or CMF + N + CMF
420 V < U
N
< 500 V Standard:
Û
LL
= 1300 V
+ d u /d t + (N or CMF) + N + d u /d t + CMF
or
Reinforced:
Û
LL
= 1600 V,
0.2
microsecond
rise time
+ N or CMF + N + CMF
500 V < U
N
< 600 V Reinforced:
Û
LL
= 1600 V
+ d u /d t + (N or CMF) + N + d u /d t + CMF
or
Reinforced:
Û
LL
= 1800 V
+ N or CMF + N + CMF
600 V < U
N
< 690 V Reinforced:
Û
LL
= 1800 V
+ d u /d t + N + N + d u /d t + CMF
Reinforced:
Û
LL
= 2000 V,
0.3
microsecond
rise time ***
N + CMF + N + CMF
***If the intermediate DC circuit voltage of the drive is increased from the nominal level by resistor braking,
check with the motor manufacturer if additional output filters are needed in the applied drive operation
range.
Abbreviation Definition
U
N
Nominal AC line voltage
Û
LL
Peak line-to-line voltage at motor terminals which the motor insulation must withstand
P
N
Motor nominal power
d u /d t d u /d t filter at the output of the drive
CMF Common mode filter (E208)
N N-end bearing (Insulated motor non-drive end bearing)
Motor
type
Nominal AC supply
voltage
Requirement for
Motor
insulation
system
ABB d u /d t and common mode filters, insulated N-end
motor bearings
100 kW < P
N
< 350 kW
or
IEC 315 < frame size <
IEC 400
P
N
> 350 kW
or
frame size > IEC 400
134 hp < P
N
< 469 hp
or
NEMA 500 < frame size <
NEMA 580
P
N
> 469 hp
or
frame size > NEMA 580