ABB ACS880-1607LC, Руководство по оборудованию

Страница: 47 / 106

Connecting the energy storage cable and load disconnected
indicator cable
￭ Connection diagram
This diagram shows the connections between the DC/DC converter unit and an energy
storage.
Connection with 3-conductor cable
Note:
Connection of the DC/DC converter unit with a single DC/DC converter module. In case of parallel modules,
each module must have the output cabling of its own. The cablings must also be identical (cable type, cross-
sectional area, and length).
1)
Shielded 3-conductor cable, and 360 degree grounding of the cable shield at the cable entry. When you use
parallel cables, make sure they are identical (type, cross-sectional area, length etc).
2)
Disconnecting device for service purposes
3)
Connection to the load disconnected indicator [P13.x] on the cabinet door
4)
Protective circuit breaker
Electrical installation 47
11