ABB ACS 601, Руководство по оборудованию

Страница: 19 / 88

ACS/ACC/ACP 601 Drives ACx=ACS/ACC/ACP 1-1
Chapter 1 – Introduction
General The ACS 600 product family of three phase AC drives includes
• the ACS 600 (for most applications)
• the ACP 600 (for positioning, synchronizing and other high-precision
control applications)
• the ACC 600 (for crane drive applications)
• the ACS 600 MultiDrive (for multidrive applications)
The application programs are introduced in
Appendix – A
.
Study this manual carefully before installing, commissioning, operating
or servicing the drive. We expect that you have a basic knowledge of
physical and electrical fundamentals, electrical wiring practices,
electrical components and electrical schematic symbols.
Delivery Check Check that there are no signs of damage. Before attempting installation
and operation, check the information on the drive nameplate to verify
that the unit is of the correct model.
Nameplate Each ACx 600 has a nameplate for identification purposes. See Figure
1-1. The nameplate data includes a type code and a serial number,
which allow individual recognition of each unit.
Type Code
The ACx 600 Type Code contains information on the properties and
configuration of the drive. The Type Code Chart explains the
significance of each digit or character in the Type Code.
Frame Size ACx 600 drives are manufactured in several different chassis sizes that
are designated as Frame R2, R3, etc. Drives of several different ratings
are manufactured in the same frame. The ACx 600 rating tables on
page A-1 in Appendix A list the Frame Size used for each Type Code.
The Frame Size is not marked on the nameplate.
Serial Number The first digit of the serial number refers to the manufacturing plant.
The next three digits refer to the units manufacturing year and week,
respectively. The remaining digits complete the serial number so that
there are no two units with the same serial number.