ABB ACQ800 Series, Руководство по оборудованию

Страница: 113 / 140

ACQ800-37 Hardware Manual 113
Technical data
NEMA ratings
The ratings for the ACQ800-37 with a 60 Hz supply are given below. The symbols
are described below the table.
Symbols
Note: The ratings apply at an ambient temperature of 40 °C (104 °F). At lower
temperatures, the ratings are higher.
ACQ800-37 type
Nominal ratings Normal use
Heavy-duty
use
Heat dis-
sipation
Air flow
Noise
level
I
1N
A
I
max
A
P
cont.max
hp
I
2N
A
P
N
hp
I
2hd
A
P
hd
hp kW ft
3
/min dBA
Three-phase supply voltage 380 V, 400 V, 415 V, 440 V, 460 V or 480 V
ACQ800-37-0070-5 112 168 75 114 75 88 60 2.4 295 73
ACQ800-37-0100-5 129 234 100 132 100 114 75 2.8 295 73
ACQ800-37-0120-5 145 264 125 156 125 125 100 3.4 295 73
ACQ800-37-0170-5 180 291 150 192 150 156 125 6 765 74
ACQ800-37-0210-5 220 355 200 240 200 183 150 8 765 74
ACQ800-37-0260-5 270 438 250 302 250 226 150 8 1860 75
ACQ800-37-0320-5 329 530 300 361 300 273 200 10 1860 75
ACQ800-37-0400-5 410 660 350 437 350 340 250 12 1860 75
ACQ800-37-0460-5 473 762 450 504 400 393 300 14 1860 75
ACQ800-37-0510-5 536 863 500 571 450 445 350 16 1860 75
ACQ800-37-0610-5 630 1016 550 672 550 524 400 20 1860 75
Nominal ratings
I
1N
Nominal input current
I
max
Maximum output current. Allowable for 10 seconds at start, otherwise as long as allowed
by drive temperature.
P
cont.max
Typical motor power. The power ratings apply to most 4-pole NEMA-rated motors at
nominal voltage (460 V).
Normal use (10% overloadability)
I
2N
Continuous rms current. 10% overload is allowed for 1 minute every 5 minutes.
P
N
Typical motor power. The power ratings apply to most 4-pole NEMA-rated motors at
nominal voltage (460 V).
Heavy-duty use (50% overloadability)
I
2hd
Continuous rms current. 50% overload is allowed for 1 minute every 5 minutes.
P
hd
Typical motor power. The power ratings apply to most 4-pole NEMA-rated motors at
nominal voltage (460 V).