ACQ800-37 Hardware Manual
121
Technical data
Disposal
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
Tightening torques for power connections
Screw size Torque
M5 3.5 Nm (2.6 lb-ft)
M6 9 Nm (6.6 lb-ft)
M8 20 Nm (14.8 lb-ft)
M10 40 Nm (29.5 lb-ft)
M12 70 Nm (52 lb-ft)
M16 180 Nm (133 lb-ft)
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 61800-5-1 and EN 60204-1.
• EN 61800-5-1:2007
Adjustable speed electrical drives. Part 5-1: Safety requirements. Electrical, thermal and
energy.
• EN 60204-1:2006 +
A1:2009
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance:
The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device
- the drive module into a cabinet.
• EN 60529:1991 (IEC 60529) Degrees of protection provided by enclosures (IP code)
• IEC 60664-1:2007
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
• EN 61800-3:2004
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods.
• UL 508C:2002, Third Edition UL Standard for Safety, Power Conversion Equipment
• CSA C22.2 No. 14-10
Industrial control equipment
Содержание ACQ800 Series
