ABB ACH580-04, Руководство по оборудованию

Страница: 67 / 242

d u /d t filters protect motor insulation system and reduce bearing currents. Common mode
filters mainly reduce bearing currents. Insulated N-end (non-drive end) bearings protect the
motor bearings.
￭
Requirements table
These tables show how to select the motor insulation system and when a drive d u /d t and
common mode filters and insulated N-end (non-drive end) motor bearings are required.
Ignoring the requirements or improper installation may shorten motor life or damage the
motor bearings and voids the warranty.
This table shows the requirements when an ABB motor is in use.
Requirement for Nominal AC supply
voltage
Motor type
ABB du/dt and common mode filters, insulated
N-end motor bearings
Motor insula-
tion system
P
N
≥ 350 kW
or
frame size ≥
IEC 400
100 kW ≤ P
N
<
350 kW
or
IEC 315 ≤ frame
size < IEC 400
P
N
<
100 kW and
frame size
< IEC 315
P
N
≥ 469 hp
or
frame size >
NEMA 580
134 hp ≤ P
N
<
469 hp
or
NEMA 500 ≤
frame size ≤
NEMA 580
P
N
< 134 hp
and frame
size <
NEMA 500
+ N + CMF + N - Standard U
N
≤ 500 V Random-wound M2_,
M3_ and M4_
+ N + d u /d t +
CMF
+ N + d u /d t + d u /d t Standard 500 V < U
N
≤ 600 V
or
+ N + CMF + N - Reinforced
+ N + d u /d t +
CMF
+ N + d u /d t + d u /d t Reinforced 600 V < U
N
≤ 690 V
(cable length ≤
150 m)
+ N + CMF + N - Reinforced 600 V < U
N
≤ 690 V
(cable length >
150 m)
P
N
< 500 kW:
+N + CMF
+ N + CMF n.a. Standard 380 V < U
N
≤ 690 V Form-wound HX_
and AM_
P
N
≥ 500 kW:
+N + d u /d t + CMF
+ N + d u /d t with voltages over 500 V + CMF Check with the
motor manu-
facturer. 380 V < U
N
≤ 690 V
Old
1)
form-wound
HX_ and modular
+ N + CMF Enamelled
wire with fiber
glass taping 0 V < U
N
≤ 500 V
Random-wound HX_
and AM_
2)
+ N + d u /d t + CMF 500 V < U
N
≤ 690 V
Consult the motor manufacturer. HDP
1) manufactured before 1.1.1998
2) For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
Guidelines for planning the electrical installation 67