The described sequence in
is a proposal based on practical experience and
dependencies of the steps. It is possible to do a different sequence based on the
available information at the time the project is started. This means that several
iterations may be needed to finish the project.
•
Setting up the PCM600 project
•
Build the plant structure according to the substation structure.
For performance reasons, do not insert more than 150
IEDs of 650 series type in one PCM600 project. Larger
projects can be divided into several PCM600 projects.
•
Insert an IED in plant structure which can be done in many ways. By
inserting the IED in online mode where the configuration is read from
the physical IED, by inserting an IED in offline mode, by importing a
*.pcmi file or by selecting an IED template from the template library
(*.pcmt).
•
Rename the IED objects in PCM600 to the projects definitions.
•
ACT Application configuration
•
Configure the protection or control function for example for a
transformer application as requested.
•
Save the configuration made with ACT to make the interfaces and
signals available for other engineering tools within PCM600, for
example for PST.
•
PST Parameter setting and configuration
•
Check the configuration parameters of the physical IED for
communication channels, CT and VT conversion values of the
transformer module, for example.
•
Check and adjust if needed the setting values for example for:
•
Presentation parameters for local HMI.
•
Settings for protection or control functions.
•
Number of setting groups.
•
GDE Single line diagram configuration
•
Create a single line diagram.
•
Include measurements when needed.
•
Link the dynamic elements to functions created in ACT, for example a
breaker object to the switch function.
•
Local HMI engineering
•
Include and engineer the function blocks for LHMI element groups with
ACT.
•
Configure the function keys and LEDs with ACT.
•
Define the function key and LED behavior with PST.
•
Communication protocol engineering
Section 3
1MRK 511 261-UEN -
Engineering process
20
650 series
Engineering Manual
