IV.
User Scenario - Use IR Remote to Switch Video Channel
Use IR remote control to control PB9000-RE receiver to switch video channel, so user can control video
channel switching in front of TV/Display by easy IR remote control. PB9000-RE receiver is come with a 16
channel IR remote. User can just use PB9000 IR remote or use a 3
rd
party universal IR remote to learn both
PB9000 IR remote IR code and video source IR remote code for controlling both devices by one remote.
1. To confg Sender Video Channel Dip switch, at front bezel, to a Unique video channel confguration
as following table. Recommend to start from video channel 1 then follow the sequence on every
sender. Reboot sender for new video channel setting take effect.
2. [optional] Plug-in IR emitter cable to PB9000-SE sender IR Emitter jack and toward to video source
device IR receiver window if need IR control from TV/Display side.
3. [Must] Plug-in IR receiver cable to PB9000-RE receiver IR receiver jack and toward to IR remote
location with clear line of sight.
4. Use IR remote of PB9000-RE or use 3
rd
party universal remote control (preconfgured with PB9000-
RE IR remote), toward IR receiver which connected to PB9000-RE IR.
Notice:
Required Managed/Smart Gigabit Ethernet Switch which IGMP Snooping and Jumbo Frame/Packet function
enabled.
Maximum 16 video channels / sender / video sources allow at this scenario, number of TV/Displays is almost
unlimited.
IR remote control way is not compatible with Aavara AV Master Web Interface and 3
rd
party controller control,
please don’t mix use other control ways.
Once use Web interface Setup then Dip Switch setting will be ignore!
5