
B.
Setup within AV Master Web Interface
Click on Setup Tab on first time installation and configuration change later on, wait few seconds, AV
Master will scan and list all Senders and Receivers. Please configure all parameters for Senders and
Receivers, detail at table below, according installation & operation requirement. All settings will storage in this
Sender or Receiver only and later on operation shall connect to this Sender/Receiver's web page only.
If any USB or RS232 setting changed, the unit will need to reboot to get new setting effect.
For Device Control Command code setup, need to do by CSV file uploading way as next section show.
10