AAT s-max D1352 Скачать руководство пользователя

Страница: 41 / 44

The manufacturer of the s-max, AAT Alber Antriebstechnik GmbH, cannot be held liable for any

possible damage in the following cases:

The s-max has been handled improperly.

Repairs, assembly or other work have been performed by unauthorised personnel.

The s-max has not been used in accordance with the user manual.

No original AAT spare parts or accessories have been fitted or connected to the s-max.

Parts of the s-max have been removed.

The s-max was loaded in excess of the permissible total weight or the max. person weight.

The s-max has not been serviced regularly (every 2 years) by the manufacturer, the AAT field service

or an authorised specialist dealer.

Minors operate the s-max without supervision (except for minors older than 16 years under supervision).

The s-max has been operated with insufficiently charged battery.

Liability

11 Warranty and liability

AAT Alber Antriebstechnik GmbH warrants the s-max (with the exception of the lead batteries) and all

accessories to be free from defects in material and workmanship for a period of two years from the date

of receipt.

For the lead batteries, always assuming correct care and maintenance, AAT Alber Antriebstechnik

GmbH grants a warranty of one year from the date of purchase.

The warranty on the s-max does not cover faults which are due to:

damage as a result of excessive strain.

any damage resulting from careless handling.

violent damage.

natural wear parts (brake linings, wheel slide protection, climbing feet).

improper or inadequate maintenance by the customer.

unauthorised structural changes or improper use of the s-max or its accessories.

use of the s-max in excess of the permissible total weight or the max. person weight.

improper charging of the lead batteries.

Warranty

If new important safety information regarding the handling of your s-max is available, we will inform you

about this. As already stated at the beginning, you will always find the latest version of this user manual

on our homepage.

Should any subsequent changes be made to the product or any corrective action taken, we and/or our

authorised specialist dealer will inform you in writing about all the affected serial numbers. If your s-max

is affected by a product recall, you will subsequently be informed about all further steps to be taken.

12 Recalls and corrective actions

Содержание s-max D1352













































Результаты поиска

Содержание s-max D1352

Отзывы:

Похожие инструкции для s-max D1352

Бренды по названию

Популярные бренды

AAT s-max D1352, Руководство пользователя

Результаты поиска

Содержание s-max D1352

Отзывы:

Похожие инструкции для s-max D1352

Бренды по названию

Популярные бренды