Aastra VentureIP 480i, Руководство администратора

Страница: 13 / 174

6 IP Phone SIP Admin Guide
IP
P
h
o
n
e
U
I
C
o
n
fi
g
u
r
a
ti
o
n
IP Phone UI Configuration
You can use the IP phone UI to
configure the phone using the
"Options List". Accessible options
in this list are for both user and
administrator use.
This document describes the
administrator options only. For a
description of the user options in
the "Options List", see the model-
specific IP phone User Guide.
Using the Options Button
From the 480i/480iCT:
1 Press
%
on the phone to
enter the Options List.
2 Use the
r
and
s
to scroll
through the list of options.
3 To select an option, press the
Show softkey, press 4 , or select
the number on the keypad that
corresponds to the option.
4 Use the Change softkey to
change a selected option.
5 Press the Done softkey at any
time to save the changes and
exit the current option.
6 Press the Cancel softkey, press
3
,
or press
b
at any time to
exit without saving changes.
From the 480i CT handset:
1 Press the
Â
key to enter the
Options List when the phone is
not in use.
2 Use the scroll keys  and
Ï
to
scroll the options.
3 To select and change an option,
press the
r
keys.
4 Press
y
when done.
From the 9112i and 9133i:
1 Press the Options key on
the phone to enter the Options
List.
2 Use the r and s to scroll the
list of options, or enter the num-
ber on the keypad that corre-
sponds to the option.
3 Press 4 to enter an option.
4 Press
4
to Clear, Set, or Change
a value. The IP phone saves the
settings immediately.
5 Press the Options key again
to exit the Options List.
Administrator Level Options
Specific options in the "Options
List" allow an administrator to
change or enter values as required.
Depending on the IP phone model,
you can use specific keys on the
keypad to make option selections.
Administrator options require a
user name and password to access
the option. The default user name
is "admin" and the default
password is "22222".
The following are administrator
options in the "Options List":
• Network
• SIP Settings
• Phone Status->Factory Default
The following paragraphs describe
each of these options.
Reference
For procedures on configuring the
IP phone, see
"Configuring the IP
Phone" on page12 .