Aastra OpenCom 100, Руководство по монтажу и пусконаладке

Страница: 207 / 244

Multi-Company Variant Configuring the Multi-Company Variant
205
When setting up a new User group (in the User Manager menu), you will find
that the default company is predefined; another company can be assigned as long
as no other companies have been set up.
17.1.4 Assigning a Bundle/SIP Trunk
Connections of the same type and in the same direction are arranged in a bundle
(e.g. S
0
multi-terminal connections). To be able to correctly transfer incoming calls
to the members of the configured companies (the users) via the lines of a certain
bundle of the OpenCom 100, each of the available bundles must be assigned to
one of the companies. This is necessary to be able to transfer incoming external
calls to the correct company exchange in cases where the called internal sub-
scriber cannot be reached (“Connection to Operator”), for example. SIP trunks can
also be assigned to a company.
The assignment of bundles to companies is done in the Telephony: Trunks:
Bundle menu. The assignment of SIP accounts to companies is done in the
Telephony: Trunks: SIP trunks menu.
For outgoing external calls which users set up via the lines of their company’s
bundle/SIP trunk, the assignment of the bundle to the company is irrelevant: the
charges are assigned according to the “source” principle.
Charges are billed to the company to which the user belongs who set up the con-
nection. The OpenCom 100 recognises this on the basis of the assignment
between user groups and companies and on the basis of the routing code with
which a line of the bundle/SIP trunk was seized. For more information, please see
the following section.
17.1.5 Allocating Routing Codes
Routes are used for automatic and selective seizure of bundles or connections for
external calls. It is possible to seize a route by predialling a code.
In the Telephony: Trunks: Route menu, you can define which company can seize
each route. An individual code for the seizure is allocated per route for each
company. The OpenCom 100 ensures that during configuration no seizure code is
allocated twice (for two different routes) for each company. If during configuration
of a route no code is allocated for one of the configured companies, the route con-
cerned cannot be seized by the members (user groups) of this company.