Muting and Unmuting Calls
Objectworld Unified Communications Server
7
2.5 Muting and Unmuting Calls
Press the microphone button to mute handset, headset, or handsfree. The speaker
light flashes slowly and the text “Mute” appears on the screen. You can still hear the
caller, but the caller does not hear you. Switch between mute and unmute by
pressing the microphone button.
2.6 Conferencing
The 9112i phone supports up to three parties (including you) in a conference call.
This is a 3-way call.
To create a conference call
1
Make sure that you are connected to the first party that you want to include in
the conference.
2
Press the
Conf
button.
3
Dial the number of the person that you want to add to the conference.
4
Wait for the new party to answer.
You can consult with the new party before you add them to the conference.
5
If you do not want to add the new party to the conference, press the telephone
button while connected to the new call.
This disconnects the new party, leaving the original call on hold.
To go back to the original call, press the line/call appearance button for this call.
6
If you want to add the new party to the conference, press the
Conf
button again.
NOTE:
If you put a muted call on hold, the phone automatically takes
the call off mute when you reconnect to the call.
NOTE:
Only the conference originator can send dual-tone multi-
frequency (DTMF) or touch tone dialing to conference parties. DTMF
tones can be used to interact with voice mail systems and automated
attendants.
Содержание 9112i IP PHONE
Страница 1: ...Objectworld Unified Communications Server Aastra 9112i IP User Guide...
Страница 4: ......
Страница 29: ...Objectworld Unified Communications Server 25...