Ending Calls
Objectworld Unified Communications Server
9
6
When the receiving party answers the call, press the
Xfer
button to complete
the transfer.
If instead you would like to cancel the transfer and return back to the original
caller, drop the current call by pressing the
Drop
soft key, then press the line/
call appearance button for the held call.
2.8 Ending Calls
To end a call, make sure you are connected to a call, and press the telephone button
or the
Drop
softkey. If you are connected through the handset, you can also place the
handset back on hook to end the call.
2.9 Redialing
Press the
Redial
button to automatically dial the number that was most recently
dialed from your telephone.
2.10 Forwarding Calls
The call forwarding on the IP phone allows incoming calls to be forwarded to
another destination.
Call forwarding is disabled by default. You can enable call forwarding on a global
basis only.
The following are the modes you can configure for call forwarding:
2.11 Changing the Volume
To change the ringer volume setting, press the volume button when the phone is on-
hook and idle.
Table 2–1: Call forwarding modes
Call Forward Mode
Description
Off (Aastra Web UI only) Disables call forward
All
Phone forwards all incoming calls immediately to the
specified destination
Busy
Phone forwards incoming calls if the line is already in
use
No Answer
Phone forwards the call if it is not answered in the
specified number of rings
Busy No Answer
Phone forwards the call if either the line is already in use
or the call is not answered in the specified number of
rings.
Содержание 9112i IP PHONE
Страница 1: ...Objectworld Unified Communications Server Aastra 9112i IP User Guide...
Страница 4: ......
Страница 29: ...Objectworld Unified Communications Server 25...