Issues Resolved on Series 5i Phones in Release 2.1, Build 2145
112
RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
Issues Resolved on Series 5i Phones in
Release 2.1, Build 2145
This section describes the issues resolved on the Series 5i IP phones in release 2.1.
The following table provides the issue number and a brief description of each fix.
Note:
Unless specifically indicated, these resolved issues apply to all
phone models
.
Issue Number
Description of Fix
User Interface
CLN06471
Dial tone for outgoing intercom calls is no longer cancelled after the inter-digit
timeout expires.
CLN06707
Contrast setting is now applied at start of the phone booting.
CLN06721
Added a check when the NAT address was being set, to stop it being set to "…"
which was corrupting the VIA header in SIP messages.
DEF04273
57i CT: Unanswered outbound call - CANCEL is now sent correctly after expiry of
m_ringtimer.
DEF05136
"Directory" and "Callers" keys LED now light up when you enter these screens.
DEF05170
Softkeys are now accessible when you are on a call and another call comes in.
DEF06418
Phone no longer needs to be rebooted when a FQDN time server is configured via
the web interface.
DEF06813
Added "status scroll delay" and "xml beep support" parameters configuration to the
web interface.
DEF06866
Changing SIP DSCP value from the options menu now prompts for reboot.
DEF06958
57i CT: Fixed an intermittent crash on the 57i phone when making a call from the
base to a cordless handset after you had previously removed the pairing for a 2nd
cordless handset.
DEF07032
In the Aastra Web UI, the intercom "prefix code" field is now disabled for phone-side
outgoing Intercom settings.
ENH07231
To speed up the operation of speed dial keys, DTMF Playback is now disabled by
default.
