55
5.
Loop the trailing end of the belt over the
shaft (belt is partially through the
opening).
6.
Reinstall the bearing onto the wheel
shaft, being careful to engage the two
locating pins into the holes in the
bearing support beam. Secure the
bearing with two self-locking nuts.
7.
Install the belts around the wheel and
pulley according to the instructions
provided with the belt.
8.
Reinstall diameter seals or hub seal and
tighten retaining screws. Rotate wheel
in clockwise direction to determine that
wheel rotates freely with slight drag on
seals.
9.
Reinstall bearing locking collar. Rotate
collar by hand in the direction the wheel
rotates (see label provided on each
cassette for wheel rotation).
10.
Lock in position by tapping drift pin
hole with hammer and drift. Secure in
position by tightening set screw.
11.
Reinstall Bearing Access Cover.
12.
Apply power to wheel and ensure that
the wheel rotates freely without
interference.
Belt Replacement
Protect hands and belt from possible
sharp edges of hole in Bearing
Support Beam.
CAUTION
Содержание H3 Series
Страница 64: ...64...
Страница 65: ...65...
Страница 77: ...Maintenance Log E Coated Coil...
Страница 79: ......