A&D Omniace RA2000 series, Инструкция по эксплуатации

Страница: 54 / 114

3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-20
3.11. System – Recording Setting
SRC (Set Record Ch) Setting record channel
SDN (Set Data No.) Setting Data No.
SAN (Set Annotation ON/OFF) Setting annotation print
* “TIP”, “TOP”, or “TCP” command supports the string of a user annotation page.
Function Sets record channel.
SRC P1 (Delimiter)
Input Format
P1: Record channel Select a valid channel in ASCII HEX format.
(1=valid/0=invalid)
Examples
RA2300MK Ⅱ
RA2800A
Only CH1 is valid 00001 000000001
Only CH8 is valid 00080 000000080
All the channels are valid 0FFFF 0FFFFFFFF
E1 is valid
1FFFF 1FFFFFFFF
E2 is also valid 3FFFF 3FFFFFFFF
Output Format None
Description
While the RA2300MK
Ⅱ
is operating, an execution error occurs.
If the memory block size becomes invalid due to the setting, it is
automatically corrected to the normal value.
Example: After the recording channel is set to only 1 channel and the block
size is set to 32MW, if all the channels are designated as the recording
channel, the block size is automatically corrected to 2MW, because 32MM
is too large and cannot be assigned to the block size.
Function Sets data No..
SDN P1 (Delimiter)
Input Format
P1: Data No. ([1 - 9999])
Output Format None
Description
While the RA2300MK
Ⅱ
is operating, an execution error occurs.
Recording automatically increments data No. (Next number of 9999 is 1.)
Function Sets annotation print.
SAN P1, P2, P3, P4, P5, P6 (Delimiter)
Input Format
P1: System annotation print
P2: System channel annotation
print
P3: <Reserved>
P4: User page annotation print
P5: <Reserved>
P6: Annotation print interval (0=OFF, 1=ON)
(0=OFF, 1=ON)
(0=OFF, 1=ON)
(0=The first time only, 30-1000[cm])
Output Format None
Description P3 and P5 are parameters for compatibility with the RA1000 series so
that they are invalid for the RA2300MK
Ⅱ
.