A&D Omniace RA2000 series, Инструкция по эксплуатации

Страница: 97 / 114

5. Execution Command – E**
Communication for RA2000 series (1WMPD4003507)
5-7
5.5.Others
EPA (Execute Page Annotation) Executing page annotation print
EFD (Execute paper FeeD) Executing paper feed
ESI (Execute System Initialize) System Initialize Command
Function Execute page annotation print.
Input Format EPA (Delimiter)
Output Format None
Description
When the RA2300MK
Ⅱ
is not operating, a page annotation is printed.
When waveforms are being recorded, a page annotation is printed over the
waveforms.
Function Execute page annotation print.
Input Format EFD P1 (Delimiter)
P1: Sets recording paper feeding amount ([1-100]) mm (Can be omitted.)
Output Format None
Description When P1 is set, paper is fed according to the set amount.
When P1 is omitted, feeding continues until another command is received.
The ESP command is used to stop feeding.
Function System initialization
ESI P1 (Delimiter)
Input Format
P1: Initialized settings
P1 Initialized settings
1
Initializes setup data for RA2300MK Ⅱ main unit only
2
Initializes setup data for RA2300MK
Ⅱ
main unit and
all memory block
Omitted The same as the case of P=2
Input Format ESI (Delimiter)
Output Format None
Description Communication settings are not initialized.
While the RA2300MK
Ⅱ
is operating, an execution error occurs.
Initialization and application restart are made.
In the case of P1 = 1 Not clearing memory block, memory data will be lost if the block size
changes through initialization.
CAUTION
Initialization through the ESI command necessitates the restart of the main program, which
forcibly disconnects the communication connection. Accordingly, reconnection is needed after
the initialization. To completely finish the initialization, it needs at least 5 seconds. Allow
sufficient time, and then execute reconnection after performing this command.
CAUTION