A&D Omniace RA2000 series, Инструкция по эксплуатации

Страница: 57 / 114

3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-23
3.13. Other Settings
STR (Set TRans CH.) Setting real-time transfer channel
SIM (Set Input Monitor) Setting display speed of input monitor
SAT (Set Auto Transmit) Setting transmit function
Function Sets real-time transfer channel.
STR P1, P2 (Delimiter)
Input Format
P1: Specifying channel
P2: ON/OFF
[1-16, E1, E2, A] for RA2300MK Ⅱ
[1-32, E1, E2, A] for RA2800A
A means a batch setting.
(0=OFF, 1=ON)
Output Format None
Description Real-time transfer is executed with the “ETS Execute Real-time data trans”
Function Sets display speed of input monitor.
SIM P1, P2, P3 (Delimiter)
Input Format
P1: Speed numeric value
P2: Speed unit
P3: Switch ([0-1000] step 1 0=External synchronization
(Can be omitted)
(0=[us/div], 1=[ms/div], 2=[s/div], 3=[min/div])
(Can be omitted)
(0=input monitor, 1=chart, 2=memory recording,
3=HD recording) (Can be omitted)
Output Format None
Description When all parameters are omitted, a parameter error occurs.
The current recorder mode limits the switch selected with P3.
The cases in which a switch is allowed are below. (When it is disallowed, a
mode error occurs.)
Recorder mode
Input
monitor
Chart Memory
recording
HD
recording
Pen recorder Enabled Enabled Disabled Disabled
Memory recorder Enabled Disabled Enabled Disabled
HD recorder Enabled Enabled Disabled Enabled
Multi recorder Enabled Enabled Enabled Enabled
X-Y recorder Enabled Disabled Disabled Disabled
Data recorder Enabled Disabled Disabled Disabled
Function Sets transmit function.
SAT P1, P2 (Delimiter)
Input Format
P1: Record error occurrence 0=No transmit 1=Transmit
P2: Transmit during recording 0=No transmit, 1=Transmit after
recording is finished, 2=Transmit when trigger is detected.
Output Format None
Description
When the specified cause occurs, “!” is output from the RA2300MK
Ⅱ
.
The detailed cause can be confirmed with the “ICA Inquire auto transmit
CAtion”