![background image](http://html1.mh-extra.com/html/aandd/omniace-ra2000-series/omniace-ra2000-series_instruction-manual_3072411047.webp)
3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-13
SCH (Set CHannel) Setting EV amp
SCH (Set CHannel) Setting TCDC amp
Function
Sets EV amp.
SCH P1, P2, P3, P4, P5, P6, P7, P8, P9 (Delimiter)
Input Format
P1: Selecting channel
P2: Amp type
P3: Input
P4: Signal type
P5: Signal ON/OFF
P6: Signal number
P7: Wavelength position
P8: Vibration
P9: Width of base line
[1-16, A] for RA2300MK
Ⅱ
and
[1-32, A] for RA2800A A means a batch setting.
5 fixed
0=OFF, 1=ON
1=V, 2=C The order of all 8 signals is
sig1, 2, 3, to 8 from left .
0=OFF, 1=ON The order of all 8 signals is
sig1, 2, 3, to 8 from left.
[1-8]
0.0 to 215.0 [mm]
2.0 to 25.0 [mm]
0.5 to 2.0 [mm]
Output Format
None
Description
When P1 = A, the other selections apply to all the channels corresponding
to the selected type with P2.
When the amp type of selected channel does not correspond to P2, a
parameter error occurs.
While any action other than a chart recording is executing, an execution
error occurs.
Function
Sets TCDC amp.
SCH P1, P2, P3, P4, P5, P6, P7, P8 (Delimiter)
P1: Selecting channel
P2: Amp type
P3: Input
P4: Setting range
[1-16, A] for RA2300MK
Ⅱ
and [1-32, A] for
RA2800A A means a batch setting.
6 Fixed
0=OFF, 1=ON, 2=GND
The content varies depending on the P7
measurement mode.
P7=1 Temperature measurement mode
with thermocouple
1=R1800 C, 2=T400C, 3=J1200C,
4=K1400C, 5=K500C, 6=W2400C,
7=R3200F, 8=T800F, 9=J2000F,
10=K2500F, 11=K1000F, 12=W4200F
P7=2 Voltage measurement mode
1=50V, 2=20V, 3=10V, 4=5V, 5=2V, 6=1V,
7=500mV, 8=200mV, 9=100mV
Input Format
P5: Filter
P6: Position
P7: Measurement mode
P8: Reference junction
temperature compensation
0=OFF, 1=10Hz, 2=30Hz, 3=500Hz, 4=5Hz
[-100.00 to 200.00] Step 0.05
1= Thermocouple, 2=Voltage measurement
1=EXT, 2=INT
Output Format
None
Description
When P1 = A, the other selections apply to all the channels corresponding
to the selected type with P2.
When the amp type of selected channel does not correspond to P2, a
parameter error occurs.
While any action other than a chart recording is executing, an execution
error occurs.
Содержание Omniace RA2000 series
