A&D BM-5, Инструкция по эксплуатации

Страница: 81 / 116

BM series 79
15.4.
Entering the Password Before Weighing
15.4.1.
pA55 1
(
Entering a password is required before starting weighing)
1 In the standby mode, press the
ON:OFF
key.
2 After
U5 ER PA55 WD
,
----
is displayed to prompt
you to enter a password.
3 Enter a four-digit password using the following keys.
The display will turn off automatically after ten minutes of
non-operation.
MODE
key.............To enter
m
RANGE
key...........To enter
r
PRINT
key.............To enter
p
RE-ZERO
key........To enter
2
CAL
key ................To go back one character
4 When the password is correct, the balance
displays the login level, turns all the display
segments on, and then enters the weighing mode.
When the administrator password is entered, you
are logged in as an administrator.
The default password set at the factory is
2222
(press the
RE-ZERO
key four times), for
administrator level.
When the password is incorrect, the balance
displays
FA iL
, sounds the buzzer three times
and turns the display off.
Note When the balance software version is 1.50 to 1.64,
the login level is not displayed when logged in.
When the balance software version is 1.660 or later,
enter the administrator password to log in as an
administrator.
PA55
PA55 WD
PA55
----
RANGE
U5 ER
Enter four characters
No operation
for 10 minutes
FA iL
Correct
password
Weighing mode
Display off
0
.
0000
LoG
In
:
ADM IN
Full segments
Login level
2222
PA55
Incorrect
password