8
四、
Function Description
This product has three basic interfaces: measurement, calibration, and system.
"Measurement" and "Calibration" contain sub-interfaces.
By default, the system enters the Main test settings page (Figure 1-1).
1
、
measuring
（1）Main test settings page
Figure 1-1 Main Settings page（First interface after booting）
Description of five sub-functions
Average: The number of times the last formal measurement result
is averaged. The larger the value, the smoother the measured value.
Power frequency: Choose to measure the AC power supply frequency
of the equipment at the site, so that the system can better deal with mains
interference.
Speed: The speed of finding the exact value, that is, the choice
of measuring speed. When the measured value fluctuates greatly, you can choose
a slower speed measurement to improve the stability of the measurement.
Loop
between 〝fast〞, 〝medium〞, and〝slow〞.
Level: The effective measured voltage value mVrms loaded on the DUT.
100～1000 (Progress in 100 units)
Internal resistance: the internal resistance of the local LCR device.
30 Euro, 100 Euro optional.
Содержание NJ300S
