AAI NJ300S, Руководство по эксплуатации продукта

Страница: 20 / 22

20
possible.
Self provided Kelvin fixture: purchase instructions, BNC male pin, regular
manufacturer standard head. Otherwise, the main hole will be damaged greatly and
the contact will be poor, which will affect the measurement accuracy and accuracy.
5
、
Anti-interference
When the frequency value is an integer multiple of the power frequency (50
/ 60Hz), the measured value is superior to other frequency points. In the disturbed
environment, the even multiple of the power frequency is better than the odd
multiple of the frequency. That is to say: the measured value of odd frequency
multiplication point is more susceptible to environmental interference. Even if
the system has done anti-interference related processing, it cannot be completely
shielded when the interference is large. (Please refer to the previous
"Interference Degree" for the size of environmental interference)
五、
Safety requirements
1
、
Charge
This unit is not equipped with a charger. Please use a 5V charger for mobile
phones or tablet computers with a current of more than 1a.After the product battery
is low, please charge it in time to avoid damaging the battery.
In addition, the electric quantity indication of the product is schematic,
especially when charging, the error will be relatively obvious. In this case,
as long as the error is not very large (about 15%), it is normal, not the product
or battery is damaged, please know.
2
、
Storage
Since the product contains a lithium polymer battery, please turn off the
product and store it when fully charged. If it is not used for a long time, it
is recommended to charge it every 3 months to avoid battery damage due to lack
of power.
This charging port uses a USB socket, but it is not a USB communication
interface. At the same time, connecting the USB port of the computer will produce
interference signals, affecting the normal operation of the product.