10
“MODE”： Circuit equivalent mode selection, automatic, series, parallel.
The current item is displayed directly above.
“ADJFRQ”： Frequency setting (Figure 1-3). The current frequency is
displayed above.
“DUT”： Select the type of measurement part, automatic, resistance,
inductance, capacitance, electrolysis. The current item is displayed above
“Interference degree”：Next to the model (see "0.00" next to "AUTO"
in Figure 1-2). No unit, pure number. Indicates the intensity of electromagnetic
interference at the test site. When the general value is less than 50, it has
little influence on the measured value.
（3）Frequency settings page
Figure 1-3 frequency setting page
The small yellow box is the current operation position.
"LEFT", "RIGHT":
Change the position. Can be moved cyclically.
"ADJ":
Set new value. The current bit cycles from 0 to 9 (the highest bit is limited to
0 to 3).
"OK":
The new setting frequency is effective.
Содержание NJ300S
