a2b Orsted, Руководство по эксплуатации

Страница: 8 / 80

User manual
3.2 Replacement of components, fitting of accessories
Before mounting any components or accessories (including
different tyres), you should ask your certified A2B specialist dealer
if they are appropriate for your A2B.
Please read and observe the instructions for the respective
components or accessories you have bought for your A2B. Please
observe the manufacturer's instructions for the components or
accessories if they are different from these instructions.
Like all mechanical components, your A2B is subject to wear
and tear. The user must particularly watch out for wear and tear
under higher workloads. If a component's life cycle is exceeded,
this component may suddenly become inoperative leading to severe
or even fatal injuries. Please therefore watch out for signs of wear
and tear such as cracks, scratches and changes of colour in areas
which are subject to high strain, e.g. on the frame, fork, wheels and
handlebars, indicating that the life cycle has been completed or
even exceeded. Have worn components replaced immediately by
your specialist dealer.
If you do not check components or accessories for fitness
and install, use and maintain them properly, this can lead to severe
or even fatal injuries.
The use of non-original components or spare parts may
endanger your A2B's safety and void the warranty.
The replacement of components or fitting of accessories will
be made at your own risk, since the fitness, reliability or safety of
these parts for use with your A2B may not have been checked by
Hero Eco.
3.3 Adjusting the brake levers
Are you able to easily operate the brake levers? If not, take your
A2B to an A2B specialist dealer to have the angle of the brake
levers adjusted.
Alternatively, you can adjust the brake levers' angle yourself as
indicated below:
1. Loosen the screw below the brake lever using an appropriate
Allen key.
2. Adjust the angle as required.
3. Tighten the screw and make sure the brake lever is held securely
in place.
For adjustment of the brakes, you should take your A2B to an
A2B specialist dealer.