a2b Orsted, Руководство по эксплуатации, Страница: 42 / 80

User manual
5.6.2 sMMI
• The contacts of the sMMI dock are spring loaded and should be
cleaned from time to time using a contact spray to ensure they
operate flawlessly and for a long time.
• The sMMI casing must only be cleaned using a damp (not wet)
cloth.
5.7. Transport
The following information must be observed when transporting the
Pedelec by car:
• Protect all components of your Pedelec from moisture and dirt by
taking appropriate measures.
• Remove the battery and sMMI from the bicycle before attaching
the Pedelec to your car's bicycle rack. The weight that you have
to lift, particularly for a roof bicycle rack, is thus reduced.
• Always transport the battery and the sMMI inside your car.
• When transporting the Pedelec inside your car (e.g. in an estate
car), the sMMI and battery should also be removed to avoid
damage during loading and the journey.
• In case of carrier systems featuring down tube clamping, make
sure that the battery mounting rail is not crushed/damaged when
tightening the clamping device.
• Ensure that the cable ends cannot cause damage to the Pedelec
or your car during transport.
• Check all the Pedelec's contacts for possible foreign matter or
moisture after transportation. To ensure safe operation, all plug
connections in particular must be free from dirt and foreign matter
as well as completely dry.
• Never put your Pedelec on its gear box side during transport, for
instance in a car boot. It could be damaged in this way.
5.8. Warnings
• When not in use, do not expose your Pedelec to strong sunlight
for long periods. This can cause the motor to heat up and, in
extreme cases, not be able to operate at full power. Plastic parts
also age faster under intense sunlight.
• If high temperatures (caused for example by uninterrupted
operation or while stopped owing to sustained exposure to
sunlight) cause the system to stop, let the motor cool down for
about 10 minutes before continuing your ride.
• The maximum speed (non-motorised operation) of the system
is 75 km/h. When exceeding this speed, you endanger the
electronic components which could be damaged in the worst
case. The maximum speed is logged by the system.
5.9. Error indications and possible solutions
The system cannot be switched on
(no indication on the sMMI display)
• Has the battery been correctly inserted into its holder?
• Have all plugs been correctly connected?
• Are there any deposits (such as metal filings) on the magnetic
battery plug? Please check this very carefully!
• Is the battery "awake"? After 48 hours without being used, the
battery goes into a "deep sleep" and must be reactivated by
pressing the battery button once.