a2b Orsted, Руководство по эксплуатации

Страница: 41 / 80

41
Never install the motor without the
torque support [20]. This would lead to
a write-off (twisting off the cable). In this
case, all warranty or guarantee claims
shall become void.
Carry 5 cable fixers with you
alongside your repair tool in order to be
able to refasten any loose cablessecurely
during a journey.
Mounting or removing the drive
wheel is best carried out with the
Pedelec turned upside down (resting on
the handlebars and saddle). Remove the
sMMI fixed to the handlebars first to avoid
damage.
5.6. Cleaning the motor and sMMI
Never use cleaning benzine, thinners,
acetone or similar agents when cleaning
the motor and sMMI. Never use abrasive
or aggressive cleaning agents. Instead,
only use commercially available household
cleaning agents and disinfectants (isopropyl
alcohol).
5.6.1 Motor
• Your Pedelec's motor should be cleaned
regularly to remove dirt, ideally using a
dry brush or a damp (not wet) cloth. Do
not use running water, such as a water
hose or even a high-pressure cleaner for
cleaning. Riding in the rain and on wet
ground, however, are possible without
any problems.
• Water infiltration may destroy the motor.
Therefore, always make sure when
cleaning that neither liquids nor moisture
get into the motor.
• Do not clean the motor when warm, e.g.
immediately after a journey. Wait for the
motor to cool down. Otherwise this may
lead to damage.
• If the motor has been removed, e.g.
for cleaning, it must never be held or
transported by the cables, otherwise
there is a risk of breaking the cables.
• If the motor has been removed from the
Pedelec's frame (see section 4.1), the
plug from the motor and the socket of the
cable leading to the battery back must be
checked for contamination and cleaned
before reconnection.