a2b Orsted, Руководство по эксплуатации

Страница: 61 / 80

61
8.4 Drive chain
Your A2B is equipped with a
high-quality chain. This chain
must be cleaned regularly and
lubricated using a synthetic lubricant
recommended for bicycles.
8.5 Brakes
Check the hydraulic brake lines for signs of wear and fraying.
Pull the brake lever tight and check whether the brakes are
operating properly.
Make sure that the rotors are free from any residues and oil.
Never wait until the brake pads are completely worn out. Replace
the brake pads as required.
If the brake pads look worn out or the brakes do not respond as
usual, you should ask your A2B specialist dealer to check and
replace the brake pads. The brakes are less effective if the road is
wet.
If you have to travel in wet weather, always remember that your A2B
has a longer braking distance. Ride slower, keep a larger distance
between yourself and other road users and start braking earlier than
usual. Any non-compliance with these safety measures may lead to
accidents resulting in severe or even fatal injuries and/or material
damage. If you have any questions on the use of the brakes, please
contact your A2B specialist dealer.
Brake disks and pads must be free from oil and grease.
8.6 Tyres
Check the tyres for damage, cracks and unusual or heavy wear and
tear. The tyre should sit properly in the rim. Regularly check the fit
of the bead in the rim. Check that the tyre tread is free from any
foreign bodies and the valve stands out straight from the rim.
Damaged or worn out tyres should be replaced immediately.
Take your A2B to an A2B specialist dealer or a qualified bicycle
mechanic to have the tyres repaired and/or replaced as necessary.
In the unlikely event that you get a puncture, you should be familiar
with the proper method for removing and remounting the front and
rear wheels.