A.R.C. Laser C-Pro, Руководство пользователя, Страница: 5 / 40

Manual
C-PRO
5
1 Introduction
We are pleased to see that you have chosen our C-Pro and wish you every success in
your handling and application.
The mirror-based C-Pro micromanipulator made by A.R.C Laser GmbH is a high-precision
optical assembly, which perfectly meets the high requirements of microscopic laser
surgery.
This manual contains detailed information on the function, installation and handling of the
C-Pro micromanipulator.
The C-Pro allows precise control of CO
2
laser beams, which may cause injuries if handled
improperly. The operating instructions should therefore be carefully read before the device
is put into operation. For further questions regarding the safety or application of the device
or the laser and the laser radiation, please contact A.R.C. Laser GmbH.
A T T E N T I O N !
We are obliged by local laws to sell this device only to licensed physicians, through our
local authorized dealer, which holds a valid MDEL (Medical Device Establishment
License).
1.1 Copyright
This user manual is protected under copyright. The copyright prohibit any duplication of
parts or of the entire user manual without an explicit written consent by A.R.C. Laser
GmbH.
Approved copy or parts extracted from this user manual, as licensed by A.R.C. Laser
GmbH, shall include references to the original document and author as stated in this
original document. Furthermore, this copyright applies to any translated copy of the user
manual to other languages.
We would like to point out, that this user manual was prepared based on A.R.C. Laser
proprietary data and to the best of our knowledge. A.R.C. Laser reserve the rights to
revise, renew or modify any of the included drawings, images or text without further notice.
In case of any content change, the revised document will be readily available for the
regulatory authorities.
1.2 Marking and Symbols
The international sign "Attention" is attached to all surfaces, which are
hazardous for the user. Before carrying out any further works at such marked
parts, please read the user manual or contact your local dealer or contact
directly to A.R.C. Laser GmbH service department.
The laser radiation sign is intended to warn the user against aiming laser
beams to undesired surfaces by improper handling. The laser beams of this
device are not visible. When using the protection goggles filtering such beams,
the user can neither identify nor see the beams.