A-PLUS AUTOMATION T2 Series, Инструкция по эксплуатации, Страница: 4 / 48

4
T2300-T2350-T2400-T2450 Double Mitre Saw
1. GENERAL INFORMATION
1.1 MANUFACTURER AND MACHINE IDENTIFICATION PLATE
The identification plate illustrated is affixed directly on to the machine. The plate contains all identification details and
indications necessary for safe operation.
1.2 TECHNICAL SERVICE REQUEST PROCEDURES
For any requirement, please contact the Manufacturer’s Customer Service.
For any request for technical service, list the data on the identification plate, the approximate number of hours the
machinery has been used and the type of malfunction.
Via Selva, 23/25 - Forlì ITALY
1.3 CERTIFICATION
The machine is produced in conformity to the pertinent European Community Norms in force at the moment of
its introduction on the market.
1.4 WARRANTY
The replacement of defective parts is warranted (counting from the date written on the delivery bill) for a period of:
• Mechanical components - 24 months
• Pneumatic parts - 12 months
• Electrical and Electronic parts - 12 months
The warrant does not include sending technical staff. The repair will be performed at A-Plus Automation's facility
and the freight of shipment will be entirely charged to the Customer.
The warranty does not cover the damages caused by an inappropriate use of the machine or not corresponding
to the instructions described in this handbook.
The warranty decays in case of unauthorized modifications or because of accidental damages or tampering
performed by unqualified personnel.
Are excluded from the warranty, damages to the machine caused from:
• Shipping and/or Handling
• Operator errors
• Missing of maintenance described on this handbook (see the paragraph 6.5)
• Failures and/or breakage not imputable to machine malfunctioning
• Interventions or variations on the plants effected by unauthorized personnel
1.5 PRE-ARRANGEMENTS CHARGED TO THE CUSTOMER RESPONSIBILITY
It is the customer’s duty, on times agreed with the producer, to execute what is indicated in the following
documentation.
Things normally charged to the customer:
• Premises predisposition, included building works
• Pneumatic supply of compressed air (see at the paragraph 4.6.1)
• Machine power supply, observing the current norms of Country where the machine is installed (see at the
paragraph 4.6.2)
1.6 PURPOSE OF THE MANUAL
The manual herein, part and parcel with the machinery, has been designed and built by the manufacturer with the
purpose to supply the necessary information to the persons authorized to operate the machinery during its useful life.