A-PLUS AUTOMATION T2 Series, Инструкция по эксплуатации, Страница: 27 / 48

27
Double Mitre Saw T2300-T2350-T2400 - T2450
•
Picture 4.8.5.4
• Clean the working area
• Use a 27mm fork spanner to stop the blade rotation (A)
•
Picture 4.8.5.4.A
•
Unscrew using the 6mm hexagonal spanner 6 the two screws M8 that operate the stop flange-blade-pulley
shaft (C) –see picture 4.8.5.4.A
Draw our the flange and the 2 M8 screws
Draw out the blade
Position the new blade
Put the flange in its right spot and stop the blade rotation using a 27mm fork spanner (picture 4.8.5.4.A)
Insert and tighten the two M8 fastening screws using the supplied hexagonal spanner (picture 4.8.5.4.A)
Operate in the same way for the other blade
Pay attention to the screws that attach the blades to the hubs because they are different.
There is a right screw to secure the right blade and a left screw to secure the left blade.
B