A-PLUS AUTOMATION A3-P, Инструкция по эксплуатации

Страница: 7 / 28

7
A3-P
2.5 VIBRATIONS
In standard conditions conformed to the indication of machine proper utilization the vibrations do not create
dangerous conditions. The average quadratic weighed level, according to the acceleration frequency to which
arms are exposed does not exceed 2,5 m/s
2
.
2.6 NOISE EMISSIONS
In standard working conditions the Machine noise power level is:
• Acoustic Continuous Equivalent weighed pression A <70dB
• Acoustic Istantaneous weighed pression <130dB
In case of any machine modification, the above mentioned levels could be changed
2.7 TECHNICAL DATA
We have listed below the Machine’s data and technical characteristics to which you can make reference for any
eventual contact with your distributor for Technical Assistance.
TABLE 2. 7 A Tecnical data
Frames thickness (min-max) 8-100 mm /
1
/
4
" - 4
1
/
4
Frames width (min-max) 6-150 mm /
1
/
4
" - 6"
Wedges magazine capacity n. 200
Wedges size 7, 10, 15 mm.
Wedges size on request 3, 5, 12 mm.
Pneumatic feed BAR 3-6 / PSI 40-80
Air consumption
3,5 Nl at 5 BAR
0.12 cf
3
at 73 PSI
Weight approx. 32 kg / 77 lbs
Height of working bench 130 mm / 5”
Overall dimensions
320x480x380mm
13" x 19" x 15"
2.8 EQUIPMENT SUPPLIED
2.8.1 Standard accessories 2.8.2 Optional accessories
• N.1 wedge claw-head mm. 7 • Floor stand
• N.1 wedge claw-head mm.10 • Metal support extensions
• N.1 wedge claw-head mm.15 • Adjustable tilting fences
• N.1 L shaped pressure pad • Special fences for octagons
• N.1 Round pressure pad • Special fences for hexagons
• N.1 Allen Wrench 5 mm. claw-head replacement • Round and square pressure pads in rubber
• N.1 Brass rod magnet to remove Wedges • Wedges claw-heads size 3-5-12 mm
• Double mechanical pressure pad
• Triple mechanical pressure pad