A-PLUS AUTOMATION A3-P, Инструкция по эксплуатации

Страница: 6 / 28

6
A3-P
2. MACHINE DESCRIPTION
2.1 GENERAL MACHINE DESCRIPTION
The benchtop Frame Assembling Machine A3-P has been realized for frme production.
2.2 CONSTRUCTIVE CONFIGURATION
The main components constituting the machine are:
• Pneumatic clamping device to allow a proper locking of the mouldings to insert several Wedges in different
positions
• Magnetic pressure pads of several types, at quick replacement, to have the proper clamping of any profile
• Dual function foot pedal for the separate control of the clamping and wedge insertion
• Pneumatic opening of the Wedge magazine for a very quick reloading
• Wedge heads sizes 7, 10 and 15 mm.
2.3 AXIS
- X AXIS
Movement horizontal.
- Y AXIS
Movement vertical
ìPicture 2. 3 A - Movement directions
2.4 AMBIENT CONDITIONS IN THE INSTALLATION AREA
The installation area must have adequate environmental conditions.
The installation area must meet the following requisites.
• Adequate lighting to European standards (recommended 250÷650 lux)
• Well ventilated rooms
• Adequate relative humidity and temperature. The permitted temperatures go from 5° to 40° C, with a humidity
level not higher than 50% at 40° C or 90% at 20° C.
• The floor, as well as having an adequate load capacity for the machine weight, must be stable and levelled in
order to guarantee a correct support.
X
Y