A-PLUS AUTOMATION A3-P, Инструкция по эксплуатации

Страница: 15 / 28

15
A3-P
4.9 ITEMS TO BE PERFORMED BEFORE OPERATING THE MACHINE
Once the machine has been properly installed (as previously described), check that:
• The magazine is loaded with the type of Wedges suitable with the mouldings to be assembled
• The adjustment of the vertical and horizontal clamps are correct (chapter 4.8.2 and 4.8.3)
• The protective shield is properly positioned (see chapter 4.8.5)
• The working pressure is adequate to the wood hardness (see chapter 4.8.4)
• The mouldings to be assembled are properly positioned on the work bench
• Pressing halfway down on the pedal both the frontal and vertical clamps hold the frame properly
•
Press the pedal all the way down to insert the wedge
If you want to insert 2 or more wedges one upon the other in the same position, you must
release the pedal until halfway and then press it full down again to insert the second wedge