A-iPower SUA8000iE, Руководство пользователя

Страница: 28 / 44

HIGH ALTITUDE OPERATION
Specific modifications are needed for
high-altitude operation. Please contact
your authorized service center for
important information regarding these
modifications. Operating this engine
without the proper altitude modification
may increase the engine’s emissions
and decrease fuel economy and
performance.
STANDBY POWER
Connections to a Building's Electrical
System
PARALLEL OPERATION
(Optional)
Before connecting an appliance to either
generator, make sure that the appliance
is in good working order and that its
electrical rating does not exceed that of
the receptacle.
Most motorized appliances require more
than their electrical rating for startup.
When an electric motor is started, the
OVERLOAD indicator (red) may come
ON. This is normal if the OVERLOAD
indicator(red) goes OFF within 5
seconds. If the OVERLOAD indicator
(red) stays ON, consult your generator
dealer.
During parallel operation, the low idle
mode should be in the same position on
both generators.
Connect the parallel box between two
generators following the instructions.
Connections for standby power to a
building's electrical system must be
made by a qualified electrician. The
connection must isolate the generator
power from utility power, and must
comply with all applicable laws and
electrical codes.
In some areas, generators are required
by law to be registered with local utility
companies. Check local regulations for
proper registration and use procedures.
This unit requires parallel box.
WARNING:
Improper connections to a building's
electrical system can allow currentfrom
the generator to backfeed into the
utility lines.
Such backfeed may electrocute utility
company workers or others who
contact the lines duringa power outage,
and the generator may explode, burn,
or cause fireswhen utility power is
restored.
Consult the utility company or a
qualified electrician prior to making any
power connections.
OPERATION
28
A-iPower Corp. 10887 Commerce Way Unit A Fontana, CA 92337 USA
www.a-ipower.com 1-855-888-3598 or support@a-ipower.com.