3onedata IES615-1F-2DI, Руководство пользователя

Страница: 37 / 59

User Manual
33
and can facilitate the quick recovery of any network section of automatic system disconnected from the
network. The switch supports maximum 4 ring groups. Each group set up 2 ports as Ring Port and a port
cannot belong to several rings.
Hello_time setting is time interval of sending detecting packet to network at regular time. The unit is
ms. Its main purpose is to detect network connection. It sends a detecting packet to next door devices by
CPU. If they receive it, then reply a confirm packet to ensure network connection is active. If this setting
will influence self-recovery time, we suggest advanced users can use it.
Basic interface of Rapid Ring as shown in figure 5.9.2.1:
(Figure 5.9.2.1)
Initial interface display redundancy protocol is none, can configure it through [Settings], Ring V3
support Single ring, coupling ring, chain ring and Dual_homing.
Ring V3 enable method:
1. Open Ring V3, please choice Ring V3 in [Settings], and please check the figure 5.9.2.2
(Figure 5.9.2.2)
2. After select Ring V3, Configuration interface is as figure 5.9.2.3, we can see Ring V3 support 4
different ring group: Single, Coupling, Chain and Dual_homing.