User Manual
21
Configuration
Items
Description
Port
Port name, corresponding to mark in panel.
Type
Display port type (TX or FX).
Speed
Display configurable speed of port or auto-negotiation mode.
Duplex
Auto-negotiation (AUTO), full duplex (FULL), half duplex (HALF) optional,
default mode is auto-negotiation mode.
Enable
Configurable ports enable or disable. Selecting square frame is for enable the
corresponding port. It cannot transmit data if any port disable. The default is
―Enable‖.
Flow Control
Whether selecting flow control to the port. Only can selecting flow control when
the port enable. The default is off.
The described Electric port is the common network device RJ-45 port, commonly known as "crystal
head", it's is a twisted-pair Ethernet interface type. This interface can be used in 10Base-T and
100Base-Tx Ethernet, transmission media is twisted pair, but according to different bandwidth media
have different requirements, in particular, 1000Base-Tx Gigabit Ethernet connection, at least to use
cat5e.
Port Speed
Port speed shows the connecting speed of the port. It includes 3 kinds of speed: 10M, 100M and
auto-negotiation.
10M uses 10base-T standard and UTP cable for connection. When the port is in 10M speed,
Link/Act indicator will blink continuously while data transmitting and status indicator of 10M/100Mbps will
stay OFF.
100M uses 100Base-TX standard and UTP/STP cable for connection. When the port is in 100M
speed, Link/Act indicator will blink continuously while data transmitting. 1000M fiber port uses
1000Base-X standard and single/multi-mode fiber for connection. Main fiber of 1000Base-X standard
includes: 62.5nm multi-mode fiber and 50nm multi-mode fiber. Gigabit SFP port slot needs to be used
with the SFP optical module.
Port Enable
This item provides a device to enable/disable the port. When choosing disable, the device would cut
off power supply of this port. Even if other device is connected to this port, all status indicators of this port
are OFF. Only enable this port, all settings about this port will be valid. This item provides a kind of safety
mechanism to protect the port from illegal use. It is not allowed to disable all the ports.
Duplex Mode
Full duplex of the switch means switch can transmit and receive data at the same time. Half duplex
of the switch means switch can transmit or receive data in a certain time. Generally the speed will
choose auto-negotiation so that the port can automatically judge the connection type of the device
connected to it and automatically adjust the connection type to ensure the maximum compatibility.
Flow Control
Flow control is used to prevent the frames from discard while port is blocked. This method is to send
back the blocking signal to its original address while sending or receiving buffer area start to overflow. It
limits the abnormal flows into a certain range. Flow control can be effective in preventing large amounts
of data in the network instant impact on the network to ensure the efficient and stable user network
running.
Содержание IES615-1F-2DI
Страница 20: ...User Manual 16 RS 232 RS 485 RS 422 serial port Optional ...
Страница 57: ...User Manual 53 ...
