3onedata IES615-1F-2DI Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 59

background image

User Manual

28

The device provides the function of static MAC address forwarding. The destination address includes the
data packets with static MAC address which will be transferred to the appointed port. Embedded
forwarding address list in the switch chip can learn and support 2,000 MAC addresses and 16 multicast
forwarding ports list. Static MAC address carry out transmit function, it did not accept the arrangement of
aging.

(Figure 6.5.7)

Button [Add/Edit], [Delete] were used for add/delete static Multicast MAC address. Join port is used

to  choice  the  transmit  port  of  static  MAC  address,  can  point  to  1  or  more  transmit  port.  Knock[Add],
[Delete],  static  MAC  address  will  be  updated.  For  example,  add  MAC  address  ―01-00-00-00-01-01‖
member  is  port  1,  2,3,

4. Multicast MAC address is 1 of highest byte‘s low byte. All none multicast

address did not allow to add in this table and the format must according to XX-XX-XX-XX-XX-XX, did not
have space or other illegal character, otherwise, will be display warning information.

1. This function has great impact on forwarding multicast, unless you can make sure the address is no problem,
otherwise, please use it with caution.
2. The following multicast addresses are reserved for the device or protocol, please don't use
them: 0180C20000xx, 01005E0000xx.
3. IGMP dynamic learning will not update the multicast address, static multicast forwarding is a kind of safety
mechanism.

5.8 QOS

5.8.1 QOS Classification

QoS provides four internal queues, each queue supports four different levels of traffic, shorter
persistence time of high-priority data packets in the switch, supports lower latency for certain
delay-sensitive traffic. According to 802.1p priority tags and IP TOS, equipment can be able to put the
packets to an appropriate level.

«
...
30
31
32
33
34
...
»

Содержание IES615-1F-2DI




























































Отзывы:

Нет отзывов

Похожие инструкции для IES615-1F-2DI

Бренд: C&H Technologies Страницы: 46

Бренд: Ubee Страницы: 9

Бренд: NetComm Страницы: 3

Бренд: APM Страницы: 3

Бренд: Patton electronics Страницы: 23

Бренд: 8level Страницы: 52

Бренд: LevelOne Страницы: 26

Бренд: TP-Link Страницы: 2

AlterPath Manager 2500

Бренд: Cyclades Страницы: 368

RuggedSwitch RS500

Бренд: RuggedCom Страницы: 16

Бренд: N-Tron Страницы: 21

Бренд: ICP DAS USA Страницы: 60

Wireless ADSL2/2plus Modem Router 54Mbps

Бренд: Kraun Страницы: 57

Бренд: NASdeluxe Страницы: 6

Бренд: Tripp Lite Страницы: 2

Бренд: Toto Link Страницы: 38

Бренд: D-Link Страницы: 80

Amplifi DHP-1565

Бренд: D-Link Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды