3M Protecta Rebel 3590610, Инструкция пользователя

Страница: 18 / 176

18
Table 3 – Inspection & Maintenance Log
Serial Number(s): Date Purchased:
Model Number: Date of First Use:
Inspected By: Inspection Date:
Component: Inspection:
User
Competent
Person
SRD
(Figure 13)
Inspect for loose bolts and bent or damaged parts.
Inspect Housing (A) for distortion, cracks, or other damage.
Inspect the Swivel Eye (B) for distortion, cracks, or other damage. The Swivel Eye
should be attached securely to the SRD, but should pivot freely.
The Lifeline (C) should pull out and retract fully without hesitation or creating a slack
line condition.
Ensure device locks up when lifeline is jerked sharply. Lockup should be positive with no
slipping.
The labels must be present and fully legible (see Figure 19).
Look for signs of corrosion on the entire unit.
Swivel Snap Hook &
Impact Indicator
(Figure 14
Inspect the Swivel Snap Hook for signs of damage, corrosion, and working condition.
Swivel should rotate freely. Inspect the Impact Indicator. If the Red Band is displayed
(Indicated Mode), impact loading has occurred and the SRD must be removed from
service and inspected. Do not attempt to reset the Impact Indicator. Return the SRD to
an authorized service center for resetting. NOTE: The Swivel will not turn freely when
the Impact Indicator is in Indicated Mode.
Wire Rope Lifeline
(Figure 15)
Inspect wire rope for cuts, kinks (A), broken wires (B), bird-caging (C), welding
splatter, (D) corrosion, chemical contact areas, or severely abraded areas. Slide the
cable bumper (E) up and inspect ferrules (F) for cracks or damage and inspect the wire
rope for corrosion and broken wires. Replace the wire rope assembly if there are six
or more randomly distributed broken wires in one lay, or three or more broken wires
in one strand in one lay. A “lay” of wire rope is the length of wire rope it takes for a
strand (the larger groups of wires) to complete one revolution or twist along the rope.
Replace the wire rope assembly if there are any broken wires within 25 mm (1 in.) of
the ferrules.
Reserve Lifeline
(Figure 16)
Inspect the reserve lifeline payout. If a fall has been arrested with most of the lifeline
out, the reserve lifeline may have been deployed. Pull the lifeline out of the SRD until
it stops. If a red band (G) is visible, the reserve lifeline is spent and the unit must be
serviced by an authorized service center before reuse.
SRD-LE Energy Absorber
(Figure 17)
On Self-Retracting Devices with Leading Edge capability (SRD-LEs) verify that the
integral Energy Absorber has not been activated. There should be no webbing pulled
out of the cover (A). The cover should be secure and free of tears (B) or other damage.
Retrieval Integral Rescue
Hand Crank
(Figure 18)
Inspect the Crank Arm (A) for distortion or other damage. Ensure that the Retrieval
Handle (B) can be folded out and secured in the cranking position.
Ensure the Retrieval Shift Knob (C) can be pulled out to the unlocked position and then
released, locking the Crank Arm in both the engaged and disengaged positions.
Test the retrieval feature for proper operation by raising and lowering a test weight of
at least 34 kg (75 lb.). When the Retrieval Handle is released, the weight should not
move and the Retrieval Handle should remain in position (no movement). A ‘clicking’
sound should be audible when raising the load.
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date:
Corrective Action/Maintenance: Approved By: Next inspection due:
Date: