3M Pentamix 2, Руководство по обслуживанию

Страница: 15 / 33

Vers. (11/02)
Pentamix
TM
2
10
Pentamix TM 2
5.2 Plunger Discs
Changing plunger discs
1. Remove plunger disc screws
2. Remove plunger discs from traverse
3. Fit new plunger discs as shown in Fig. 3
NOTE
When replacing plunger discs make sure that the smooth side of the plunger discs
is facing the polythene bag (the reverse with the fan-shaped recesses must face
away). Otherwise the polythene bag may become damaged.
Fit support discs as shown in Fig. 3.
Fig. 3 Plunger Discs
5.3 Base
Changing base
1. Place unit upside down on a clean non-slip surface
2. Remove recessed-head screws of base cover
3. Remove base cover
4. Unwind power cable from reel
5. Remove recessed-head screws holding case base
6. Remove case base
7. Fit new case base, proceeding in reverse order
NOTE
Put the screws into numbered dishes or attach to the individual parts using
adhesive tape. This will help you to reassemble the PENTAMIX 2 later on.