3M Pentamix 2, Руководство по обслуживанию

Страница: 22 / 33

Vers. (11/02)
Pentamix
TM
2
17
Pentamix TM 2
5.15 Feed Motor
Changing feed motor
1. Remove plunger discs - see section 5.2
2. Remove case base - see section 5.3
3. Remove both side covers - see section 5.4
4. Remove case bottom section - see section 5.5
5. Remove mixer shaft - see section 5.6
6. Remove case top section - see section 5.7
7. Remove clutch - see section 5.10
8. Remove Allen screws from bottom plate
9. Disconnect connection wires of feed motor from PC board
10. Remove recessed-head screws of motor block
NOTE
Hold motor block firmly
11. Turn motor block through 180° anti-clockwise
12. Tip motor block
13. Carefully pull out motor shaft downwards
14. Install new feed motor in reverse order
15. Assembling housing - see section 5.20
16. Functional test - see section 6
5.16 Mixer Motor
Changing mixer motor
1. Remove plunger discs - see section 5.2
2. Remove case base - see section 5.3
3. Remove both side covers - see section 5.4
4. Remove case bottom section - see section 5.5
5. Remove mixer shaft - see section 5.6
6. Remove case top section - see section 5.7
7. Release connection wires of mixer motor from PC board
8. Remove connection to bearing plate for mixer motor
9. Remove mixer motor
10. Install new mixer motor in reverse order
11. Assembling housing - see section 5.20
12. Functional test - see section 6