3M Dynapro ET 3170 Terminal Series B, Руководство по установке

Страница: 110 / 125

3M Touch Systems Proprietary Information
i
Important Safety Information
Read and understand all safety information before using the 3M Dynapro
TM
ET 3170 terminal. Follow all instructions marked on the product and described in
this document. Pay close attention to the statement of intended use and the safety
notices.
Intended use
The 3M Dynapro ET 3170 terminal is intended to provide touch screen functions
for industrial applications when the terminal is connected to a host computer. The
ET 3170 terminal is
not intended for use in hazardous locations. Using the
terminal in conditions exceeding these ratings will invalidate the warranty and
will be solely the user’s risk and responsibility. The ET 3170 terminal is a
component. After the terminal is installed, the whole system of which it is a part
must be inspected to confirm seal ratings and compliance with all local electrical
codes.
Safety notices
DANGER
To reduce the risks associated with fire and explosion which, if not avoided, will
cause death or serious injury and/or property damage:
!
Do not install or use the ET unit in a hazardous location.
WARNING
To reduce the risks associated with fire and explosion which, if not avoided, could
result in death or serious injury and/or property damage:
!
Refer to the cleaner manufacturer’s material safety data sheet and follow all instructions
and recommendations.
!
Do not use flammable or combustible cleaners.
WARNING
To reduce the risks associated with electrical shock or fire which, if not avoided,
could result in death or serious injury and/or property damage:
!
Engineer the installation of the ET unit to take into account the operating environment (e.g.,
thermal, shock/vibration factors).
!
Install the ET unit close to the power source so the unit can be easily and quickly
disconnected. For permanently connected equipment, a readily accessible disconnect
device must be incorporated in the fixed wiring.
!
Follow all product and accessory installation instructions.
!
Any servicing or other procedures not described in this manual are to be performed only by
3M Touch Systems service personnel.
!
To ensure compliance with electrical codes and safe operation of the ET unit, have a
licensed journeyman electrician familiar with local and federal codes perform all wiring
tasks.
!
When connecting power with fixed field wiring, the power cable must be double insulated.
A clear, flexible insulator (supplied) must cover the portion of the cable that is not double
insulated when connecting to a terminal strip connector.