3M Dynapro ET 3170 Terminal Series B, Руководство по установке

Страница: 99 / 125

3M Touch Systems Proprietary Information
63
APPENDIX B
Request Identification Command
About the Request Identification command [DA] (Remote)
The Request TCS Identification command allows the host computer to determine
the following information about the TCS:
!
Type of TCS with which it is communicating
!
Firmware version installed in the TCS
!
Programmable options installed in the TCS
Operator usage
None. This is a remote command only.
Host usage
This command has two equivalent forms:
<ESC>[c
<ESC>[0c
Either of these strings requests TCS identification. The TCS responds with the
following string:
<ESC>[<Pt>;<Pv>;<Pm>;<Pd>;<Pw>;<Po>c
where <Pt> is the TCS type.
If <Pt> is 1, 1020 series
If <Pt> is 2, 1030 series or 2170 EL series (mono units)
If <Pt> is 3, 1050 series or 2170 DSP Series or 3170 (color units)
<Pv> is the firmware version, given as two digits mn, meaning the <tcs> has
firmware version m.n installed.
<Pm> designates the number of bytes in decimal of Expansion Memory
installed.
If <Pm> is n, that number of bytes is installed
<Pd> is the Expansion Memory device type.
If <Pd> is 0, NVRAM
<Pw> is the write protection status of Expansion Memory.
If <Pw> is 0, write protection is disabled (can write)