3M Dynapro ET 3170 Terminal Series B, Руководство по установке

Страница: 80 / 125

3M Touch Systems Proprietary Information
44
3M Dynapro ET 3170 Terminal User’s Installation Guide
Figure 20: Keyboard Test screen (example)
To verify correct operation of the keys, touch each key on the keyboard except the
setup key. (The setup key is tested when it is pressed to exit the Keyboard Test.)
When a key is pressed, the corresponding key on the display toggles from normal
to reverse video. Continue until the entire keyboard is in reverse video. The
characters on the Keyboard Test screen reflect the NRC setting currently selected.
This test can be used to see which ASCII characters are replaced by the current
NRC.
The test remains active until you press the Setup key on the keyboard or touch the
Setup switch. This returns the terminal to the Test screen.
Raw Keyboard Test
This test is intended for service personnel only.
It tests the raw key code
for each key on an optional keyboard. (The raw key codes are unprocessed codes
sent directly from the keyboard). To begin the test, touch the RAW KEYBOARD
TEST key on the touch screen or press
Shift/F7 on the keyboard.
If the test is activated, it can be exited by touching the Setup switch on the touch
screen or pressing the Setup key on the keyboard. This returns the terminal to the
Test screen.
Continuous Integrity Test
This test is intended for service personnel only
. The terminal can
continuously test itself using the Continuous Integrity Test. To begin the test,
touch the CONTINUOUS INTEGRITY TEST key on the touch screen or type
Shift/8 on the keyboard.