![background image](http://html1.mh-extra.com/html/3m/charge-analyzer-711/charge-analyzer-711_quick-start-manual_3158023019.webp)
Quick Start Guide
3M™ Model 711 Digital Conversion Station
©3M June 2000
19
11. Remove the take-up spool end-plate (
Figure 25
).
Figure 25: Removing the End-Plate
12. Make sure the slot in the take-up spool is at or near the top of the spool (
Figures 25
and
26
).
a) To position the slot, rotate
the take-up spool by pushing down on the tag dispenser
switch until the crimp slot is at or near the top.
Figure 26: Guiding Leader Around Take-Up Spool
b) Rotate the take-up spool (clockwise) and make sure the spool is locked into position.
c) Guide the leader around the take-up spool and reinstall the end-plate.
•
The leader should be clamped into the slot in the take-up spool (
Figure 27
).
Figure 27: Leader Clamped in Crimp Slot
11.
12.
switch
a)
c)