3DGence INDUSTRY F340, Руководство пользователя

Страница: 37 / 87

3DGence INDUSTRY F340 | 37 version 1.0/07.2017
PRINT CONTROLS – menu for pause/aborting print in progress. The available options include:
Pause – suspends the printing process. After using the Pause command, the device moves its head to the home position of X and
Y axis. Temperatures are not subject to change, which is why the Pause command should not be used for periods longer than 15
minutes. During pause it is possible to comfortably change the material, install a new spool or inspect the model being printed.
When the printing process is suspended, the Pause command is replaced by Resume that if selected, will resume the printing
process. When changing material, it is recommended to pause the print at the moment when the filling is being printed, which
will reduce the risk of possible failures on the external (visible) model surface.
Abort Print – a command for canceling the printing process in progress. This option should be used If printing has to be canceled
for some reason, e.g. damage to the model or a wrong machine code preset. The print is aborted immediately – the print is
stopped after executing the last commands from the printer buffer.
CAUTION: The result of Abort Print command is not the same as in the case of using the emergency stop button!
The Abort Print command is irreversible – the interrupted process cannot be resumed.
MATERIAL STATUS
– Material Status key calls up a screen with information and operations related to installation, removing and
changing consumables:
All the information included in this screen is presented separately – on the left for extruder 0, while on the right for extruder 1.
The following description is related to material coming from the 3DGence Base of Certified Materials. Other cases are consid -
ered in OPERATING THE DEVICE chapter, section 4.
Material available – net weight of the material on spool.
Remaining
– percentage of the material remaining to use.
Feed Quality – the parameter that compares the assumed material use to actual material use. It allows for diagnosing material
feeding problems.
Unload/Change
i
Load
– if material is installed on this extruder, available is the option Unload/Change. If the selection triggers
the procedure of filament removal. If the extruder is empty the Load option is available which triggers the procedure of loading
a new material.
MANUAL CONTROLS – the MANUAL CONTROLS key transfer the user to manual control screen with some printer functions. It
was described in the section devoted to standby mode menu. During operation very useful can be the commands: Rise Bed
and Lower Bed, designed to adjust the height of the first print layer.
MENU
– functions available from the menu key level are subject to change during the operation of 3DGence INDUSTRY printer
and refer only to settings that can affect the course of printing in progress.