3D Systems Viper Pro SLA iPro 8000, Быстрый старт, Страница: 57 / 81

q u i c k s t a r t g u i d e s a f e t y
57
• Keep all resins away from heat, sparks and flame. Resin containers may rupture when exposed
to extreme heat.
Use National Fire Protection Association Class B extinguishers such as
carbon dioxide, dry chemical, or foam.
Resin Characteristics
The photopolymers used in stereolithography may be hazardous if handled improperly. Repeated
skin contact with resins may cause sensitization. Consult the manufacturer’s Material Safety Data
Sheet (MSDS) for information on specific resins. For further information on this and related
topics, consult the 3D Systems'
Resin Handling and Safety Guide .
Resin Storage
Resin should be stored in opaque, non-reactive containers, according to the guidelines given in
the MSDS included with the resin. Protect resin from sunlight and ambient room light. Resin may
be stored in vats with the lid securely fastened. Pouring resin back into the original containers is
acceptable, but be sure to leave several inches of air above the resin in the sealed container. This
will leave room for expansion and also inhibits spontaneous polymerization for some resins.
Always label resin by type and usage history.
Never mix different resins.
Resin Disposal
Do not dump used resin down any drains. Follow disposal rules established by company, local,
state, and federal authorities.